Experience counts… Green Rubber-Kennedy AG has been supplying the food processing and industrial belt needs for two decades. Offering unmatched service and product knowledge, we are the obvious choice for your belting needs. We carry a full line of fabric belting including our custom mono-pure family, sani-ply family and workhorse family belting.

Features and Benefits:
Quick, economical installation Low-profile fastener Double-staggered-grip pattern that doesn't degrade the integrity of the belt carcass Operates quietly and interfaces seamlessly with conveyor components Options: Two Hook Styles: Unibar® Fasteners - Clipper hooks welded to a common bar to enhance installation safety and ease the meshing of belt ends Carded Fasteners - Individual hooks are secured on a carding paper for safe handling. Wide variety of wire diameters, materials, leg and point lengths, strip lengths Multiple Installation Methods: Maintenance Lacers with Roller Lacing Technology™ - Lightweight, portable installation tools which gently and precisely roll the hooks into the belt for a low-profile splice Production Lacers - For high-volume production lacing Specialty Lacers Applications: For belts up to 25/34" (10mm) thick with mechanical fastener ratings up to 125 P.I.W. (21 kN/m) and minimum pulley diameters from 15/16" - 7" (24 - 175 mm).

Features and Benefits:
Alligator® Lacing is available in continuous lengths to it any belt width and provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product. Designed for belts from 1/32" to 1/2" ( 0.8 mm to 12.5 mm)*, Alligator Belt Lacing installation requires no special tools, only a hammer. The lacing is secured with teeth that embed lengthwise on the belt, providing a strong, vise-like hold. Clips hold gauge rod and lacing firmly and squarely against the belt during the installation process to ensure a strong, straight splice. The straight splice also helps ease hinge pin insertion.

Flexco® Bolt Solid Plate
Flexco® Bolt Solid Plate fasteners are engineered to meet the demands of the toughest material handling applications, providing a strong, sift-free splice with superior holding ability. A choice of sizes accommodates belts from 3/16" (5 mm) to over 15/16" (24 mm) thick.

High strength
High strength is the result of superior design and plate compression on both the top and bottom sides of the belt. High tensile strength bolts compress top and bottom plates to distribute splice tension evenly across the entire width of each fastener plate. For added strength and pullout resistance, specially formed teeth penetrate deep into the belt carcass - without damaging carcass fibers.

Easy installation
Field-proven templets, punches, and boring tools make it easy to quickly and accurately prepare belts for fastener installation. Fasteners are easily installed on-site using portable hand tools or power tools. Our exclusive piloted bolts also contribute to faster installation.

Market applications

• Sand
• Gravel
• Crushed Stone
• Grain
• Coal
• Cement
• Salt

The nominal tensile strength is valid for 23 ºC (73 ºF). The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 50% of the nominal tensile strength.

Food suitability, FDA conformance: Yes, 21CFR, details/restrictions see Habasit Food compliance declaration.

Food suitability, EU conformance: Yes, acc. to Regulation (EC) No. 1935/2004 and Regulation (EU) No 10/2011 as amended.

Food suitability, USDA recommendations: USDA AMS dairy; for compliance with USDA Dairy Equipment Guidelines and 3-A sanitary standard 20-xx. Certification is valid only if belt edges are sealed with the same material as used for the product contact surface and cleats, v-guides etc meet the standard.

Food suitability, USDA recommendations: USDA AMS meat & poultry; for compliance with standard NSF/ANSI/3-A 14159-3. Certification is valid only if belt edges are sealed and cleats, v-guides etc meet the standard.

KVP manufactures the broadest line of modular plastic belts and conveying chains available anywhere. From straight-running and radius belts to flat top, snap-on, case conveyor, multi-flex and plastic roller chains, KVP has it all.

Our experienced and helpful territory sales managers, application engineers and customer care representatives make easy one-stop shopping a reality! Being part of Habasit assures worldwide product availability, immediate response and consistently high quality standards